Lighting truss at St George's Hall Theatre, Bradford UK

Case Study: St George’s Hall

ClientSt George’s Hall, Bradford Theatres

Problem:

The concert hall’s engineering team reached the conclusion that, to provide a safe system of work, adding-in Guard Load Arrest protection to the system would be the correct solution. However, with St George’s Hall being an old concert hall, the pipe we had to pass the load arrestor’s cable through was extremely narrow and, when researching the project, no obvious answer became apparent to allow the cable, ferrule, thimble & shackle to pass through the pipe from the anchorage point to the truss below within the theatre.

Solution:

Guard Load Arrest deployed at St George's Hall, Bradford UK

The new configuration of the bottom shackles on Guard Load Arrestors means that the shackle can be easily removed from the cable (the pin fits through the thimble), thereby solving part of the problem.

Due to the pipe being so narrow, the standard thimble still wouldn’t pass through the pipe. However, with Guard Load Arrest being the product manufacturer (with a full understanding of the product’s technical file), we were able to change the thimble to a narrow gauge alternative. This allowed the thimble to fit through the narrow pipe and then the shackle be reattached through the thimble.

This solution was achieved by Guard Load Arrest being able to manufacture the solution in accordance with the technical file and provide a solution that worked precisely for the customer.

HSE logo

Warum brauche ich einen Lastableiter?

Our range of Guard Load Arrest devices help to ensure our customers comply with any applicable local legislation pertaining to lifting equipment. In this article we explore how Guard Load Arrestors are employed by our UK customers to achieve compliance with UK legislation for lifting equipment.

1500 Guard Load Arrestor with multiple hoists

The Lifting Operations and Lifting Equipment Regulations (LOLER) have been enforced in the UK since the 5th December 1998. Regulation 6 (b) (ii) within this legislation states that;

Every employer shall ensure that lifting equipment is positioned or installed in such a way as to reduce to as low as is reasonably practicable the risk from a load falling freely.

As with most legislation, this seemingly simple statement is open to interpretation, so in 2014 the Health and Safety Executive (HSE) published an Approved Code of Practice (ACOP) to clarify and set out what companies should do to meet their obligations under LOLER. The ACOP elaborates on Regulation 6 (b) (ii) by stating;

"Various methods can be used to minimise the risk of the load falling out of control. These include:

(a) multiple ropes/chains;

(b) lifting mechanisms with a high factor of safety or strength;

(c) safety gear;

(d) check valves (for hydraulic systems); and

(e) safety nets for palletised loads.”

Installing a Guard Load Arrestor alongside your primary lifting equipment can mitigate the risk of the load falling out of control by providing an independent safety function with complete redundancy to ensure compliance with LOLER.

Regulation 8 of LOLER covers the Organisation of lifting operations and Regulation 8 (1) (c) states that;

Every employer shall ensure that every lifting operation involving lifting equipment is carried out in a safe manner.

The ACOP elaborates on this by considering this regulation in relation to working under suspended loads;

Where practicable, loads should not be carried or suspended over areas occupied by people.

Where this is not practicable you should establish a safe system of work which minimises the risks to people who may need to be below the load.

Where it is necessary to leave loads suspended you should ensure that access to the danger zone is prevented and that the load has been secured properly.”

A Guard Load Arrestor running in conjunction with your primary lifting equipment can help you to establish a safe system of work which minimises the risks to people who may need to be below the load.

Please feel free to kontaktiere uns if you’d like to discuss any of the points raised in this article or have any questions about our Guard Load Arrestors.

EN 17206

EN 17206: 2020

Entertainment technology - Machinery for stages and other production areas - Safety requirements and inspections

“Utilising a load arrestor alongside a primary lifting hoist, delivers an independent safety function which provides complete redundancy.”

In June 2020, the new entertainment standard, “EN 17206:2020 Entertainment technology - Machinery for stages and other production areas - Safety requirements and inspections” was published in place of previous entertainment standards “EN 7906-1:2005” and “EN 7905-1:2001”.

The purpose of EN 17206:2020 is to produce European wide specifications for the design, manufacture and installation of lifting and load bearing equipment within the entertainment industry.  The standard applies to all machinery, machinery installations and machinery control systems which are used within assembly, staging and production facilities for events and theatrical productions. Such facilities include; theatres, exhibition halls; film, television and radio studios, concert halls, schools, bars, discotheques, open air stages and any other rooms used for shows or events.

EN 17206:2020 applies to permanent and temporary installations of lifting and moving equipment within the entertainment industry. Typical applications of the standard include; acoustic doors, auditorium elevators, compensating elevators, cycloramas, fly bar systems (manual and motor driven), lighting bars, movable lighting towers, movable proscenium arches, orchestra elevators, performer flying systems, point hoists, revolving stages and turntables, scenery storage elevators, side stage and rear stage shutters, stage elevators, stage wagons, tiltable stage floors and trap elevators.

EN 17206:2020 Annexes B & C define use cases reflecting common machinery risk scenarios (Table 1) as well as guidance on the safety functions to be implemented for each use case (Table 2).

Table 1:               Use cases for upper machinery

Table 2:               Recommended safety functions for upper machinery

For Use Cases 3, 4, 5, and 6, it is highly recommended that a safety function is implemented to maintain a safe state for the machine in respect of brake failure. Utilising a Guard Load Arrestor alongside the primary lifting hoist, provides an independent safety function which provides complete redundancy.

BS7906

BS 7906-1:2005

This standard covers the use of lifting equipment for performance, broadcast and similar applications.

Part 1: Code of practice for installation, use and removal of above stage equipment (excluding trusses and towers)

“Chain hoist categorizations must be considered when selecting electric chain hoists for the listing or suspending of loads over people, and under certain circumstances it is essential to implement an inertia reel load arrestor as a secondary suspension. The load arrestor provides an ideal, independent, fully redundant, secondary suspension in these scenarios.”

BS 7906-1:2005 provides recommendation for the safe use of lifting used to lift and traverse equipment and personnel for the following applications:

  • film;
  • television;
  • theatre and similar entertainment events;
  • conference and exhibition.

The recommendations cover the supply, installation, use, maintenance and removal of components and systems, documentation, periodic inspection, and thorough examination.

Section 8.19 of this standard details all considerations for the selection, maintenance, installation, and operation of chain hoists within the entertainment industry. Chain hoists used in the entertainment industry fall into two categories: Category A and Category B.

Category A hoists are declared by the manufacturer as intended for use by the entertainment industry for lifting and suspending loads over people and meeting the requirements of BS 7905-1 or DIN 56925.

Category B hoists are not intended by the manufacturer for lifting or suspending loads over people.

Chain hoist categorizations must be considered when selecting electric chain hoists for the listing or suspending of loads over people, and under certain circumstances it is essential to implement an inertia reel load arrestor as a secondary suspension. The Guard Load Arrest products provide an ideal, independent, fully redundant secondary suspension in these scenarios.

The table below provides additional guidance on the selection of electric chain hoists.

ABTT Bronze Logo

Guard Load Arrest Werden Sie offizieller ABTT-Unterstützer

Guard Load Arrest ist stolz bekannt zu geben, dass sie Industry Supporters für die Association of British Theatre Technicians (ABTT) sind, eine Mitgliederorganisation, deren Herzstück Backstage- und Theatergebäude sind.

Guard Load Arrest wurde gerade auf den Markt gebracht und bietet dauerhafte Lösungen zur Ladungssicherung für die Unterhaltungs- und Industriebranche. Das Produktsortiment bietet Schutz von 150 kg bis 1500 kg, und Entwicklungen sind bereits im Gange, um das Sortiment noch weiter auszubauen. Guard Load Arrest ist bestrebt, Organisationen innerhalb der Branche zu unterstützen, und war daher sehr daran interessiert, sich für diese Gelegenheit bei ABTT anzumelden.

Die ABTT ist eine Mitgliederorganisation, die Standards in technischer Exzellenz, Sicherheit und Compliance für Theater- und Live-Auftritte setzt und aufrechterhält. Die Organisation ist eine ausgezeichnete Ressource für die Unterstützung von Mitgliedern, indem sie Informationen und Ratschläge zu bewährten Praktiken, sicherem Arbeiten und Durchsetzung in der Theaterbranche bereitstellt. Sie beraten über Sicherheit, Planung und gute Praxis.

Unter anderem wird diese Partnerschaft Guard Load Arrest dabei helfen, die Bedeutung hoher Sicherheitsstandards in der Theaterbranche hervorzuheben, insbesondere in Bezug auf in der Höhe aufgehängte Ausrüstung.

Um mehr über Guard Load Arrest zu erfahren, besuchen Sie bitte www.guardloadarrest.com oder Kontakt das kompetente Team.

A range of three Guard load arrestors

Guard Load Arrest Startet

Guard Load Arrest ist gerade auf den Markt gekommen und bietet dauerhafte Lösungen zur Ladungssicherung entertainment und industriell Sektoren.

Das Produktsortiment bietet Schutz von 150 kg bis 1500 kg, und Entwicklungen sind bereits im Gange, um das Sortiment noch weiter zu erweitern.

Eine der häufigsten Anwendungen von Lastableitern ist als Sekundärsicherung für Kettenzüge. Patrick Evans, Geschäftsführer, erklärt mehr:

EN 17206 schreibt vor, dass bei der Installation von Elektrokettenzügen zwei unabhängige Sicherheitslösungen erforderlich sind. Ob die Sekundärbremse eines Hebezeugs das erforderliche Maß an Sicherheit bietet, hängt von Ihrer Risikobewertung ab, aber wir stellen immer mehr fest, dass Installateure Guard-Einheiten neben Hebezeugen einsetzen, um einen separaten Schutz zu bieten, falls das Primärsystem ausfallen sollte.“

Natürlich verfügen Elektrokettenzüge in der Regel über eine Sicherheitsbremse, die eingreift, wenn die Primärbremse ausfällt. Aber was ist die Reserve, wenn die Kette oder der Anker des Hebezeugs versagen? Patrick sagt weiter:

„Es stehen einige Optionen zur Verfügung, eine davon besteht darin, einfach ein festes Stahlseil als sekundäre Sicherheitslösung anzubringen. Das wäre extrem sicher. Allerdings verzichten Benutzer zunehmend auf diese Methode aufgrund der hohen Kosten für das Versenden eines Riggers zum Abnehmen und Neufixieren jedes Mal, wenn er benötigt wird. Schutzlastsicherungen sind eine alternative kostengünstige Option, die dieses Problem überwindet, indem sie ein Stahlseil bereitstellen, das sich automatisch aus- und einzieht, wenn es der Bewegung der Last folgt, ohne dass es gelöst werden muss.“

Wenn die primäre lasttragende Ausrüstung ausfällt, stoppt die Guard-Lastsicherung automatisch das Herunterfallen der Last, wodurch Schäden an der Ausrüstung verhindert und, was noch wichtiger ist, das Publikum/die Darsteller darunter geschützt werden.

 

Nicht nur im Unterhaltungsbereich werden zunehmend Guards installiert. Viele industrielle Anwendungen profitieren von der Lastarretierung. Patrick führt aus:

„Es gibt eine Vielzahl von Anwendungen, bei denen Lastableiter eine ideale Sicherheitslösung darstellen. Heben oder hängen Sie Geräte oder Materialien, die nicht fallen dürfen? Wenn dies der Fall ist, sollten Sie die Installation einer Guard-Lastsicherung als Schutz für den Fall in Betracht ziehen, dass die primäre Hebeausrüstung ausfällt.“

„Produktionslinien können sich keine langen Stillstandszeiten leisten, um heruntergefallene Geräte zu reparieren. Ein gutes Beispiel ist, wie einige Automobilhersteller sich auf Guard-Lastsicherungen verlassen, um wichtige Punkte in der Produktionslinie zu schützen; Ihre Ingenieure identifizierten ein Risiko, dass schweres Gerät während des Gebrauchs abschaltet, was zu einem unkontrollierten Sturz auf den Werkstattboden führen könnte. Hier kommt Guard Load Arrest ins Spiel. Ein an der richtigen Stelle positionierter Guard-Lastschutz fängt herunterfallende Geräte automatisch auf und verhindert, dass sie auf den Boden aufschlagen. Unsere Produkte sind so vielseitig und zuverlässig, dass sie sogar als Sicherheitsvorrichtung für das Heben radioaktiver Materialien in einem bestimmten britischen Kernkraftwerk eingesetzt werden!“

Die Kundenliste von Guard Load Arrest ist bereits beeindruckend, darunter die O2 Academy Group und Jaguar Land Rover.

Das neue Guard angebot ist ab sofort verfügbar.

LinkedIn
LinkedIn
Facebook
Facebook
Set Youtube Channel ID
de_DEDeutsch